氮对镀锡钢板的强化作用

通过物理化学相分析研究了3种不同氮含量镀锡板中固溶氮、化合氮的含量,结合相关理论计算了镀锡板中氮的固溶强化和析出强化对强度的贡献。结果表明:随着总氮含量从0.0021%提高到0.0103%,钢中化合氮含量下降10.1%,但是AlN析出相中的氮的含量上升10.7%。氮在提高镀锡板强度方面发挥重要作用,钢中总氮含量提高0.0082%,其对屈服强度的贡献值提升约30 MPa。     

基于伪布尔模型和启发式算法求解无容量设施选址问题

采用伪布尔模型和启发式算法来求解无容量设施选址问题。首先给出了问题的伪布尔(pseudo-Boolean)表示，然后基于Khumawala规则对问题进行预处理，最后提出两种启发式分支准则来求解问题。实验结果表明所提算法简单有效。     

Study of physicochemical properties of flutamide-loaded Ocimum basilicum microspheres with ex vivo mucoadhesion and in vitro drug release

Drug which shows extensive first pass effect is difficult task that, needs to be solved by formulators in the pharmaceutical science. The low oral bioavailability (49%) of flutamide may be due to poor wettability, low aqueous solubility and extensive first pass effect. The aim of present investigation was to prepare flutamide loaded microspheres and incorporate it into suppositories for rectal delivery to avoid first pass effect and enhance residence time. Flutamide loaded mucoadhesive microspheres of Ocimum Basilicum mucilage (OBM) were prepared using spray drying and characterized by percent production yield, encapsulation efficiency, particle size, zeta potential, polydispersity index, DSC, SEM, XRPD, in vitro drug release and stability studies. Moreover, ex vivo mucoadhesion was investigated using falling liquid film technique to determine the adhesion of microspheres to sheep rectal mucosa. The microspheres had nearly spherical shape and size about 2.53?μm. The encapsulation efficiency and mucoadhesion of optimized formulation MBF10 were found to be 69.6?±?2.3% and 89.01?±?2.18%, respectively. Percent CDR of optimized flutamide loaded mucoadhesive microspheres was found to be 88.7?±?1.3 at 7?h. In conclusion, OBM microparticles based suppository could be used to deliver drug through rectal delivery.     

热处理对挤压态Mg-6Gd-5Y-1Zn合金组织与性能的影响

通过对Mg-6Gd-5Y-1Zn(质量分数,%)合金在固溶和时效处理状态下显微组织和力学性能的研究发现,α-Mg基体、沿挤压方向分布的条状18R-LPSO相、少量的Mg₂₄(GdYZn)₅ 相以及细层片状的14H-LPSO相构成了挤压态合金的组成相。挤压态合金经固溶(T4)处理后,一部分18R-LPSO相溶入基体,并且基体中的14H-LPSO相伸长同时粗化。挤压态合金经过固溶加时效(T6)处理后,大量β′相从α-Mg基体中析出。T6态合金的室温力学性能最好,其屈服强度、抗拉强度及伸长率分别为272 MPa、406 MPa和6.1%。β′相沉淀也发生在挤压态合金的直接人工时效(T5)处理过程,但相比于T6处理,14H-LPSO相和β′相在基体中的体积分数均偏低。     

镓锗铜萃余液综合利用研究与应用

本文针对镓锗铜综合回收系统产出的萃余液,设计通过中和氧化除杂、锌粉置换除铜镉、有机试剂除钴镍、纯碱法生产碱式碳酸锌、高温煅烧生产活性氧化锌和一步法生产元明粉的生产工艺流程,有效的将镓锗铜萃余液分类分离富集,产出具有价值的富集渣和工业产品,进一步提升综合回收经济效益。     

基于目标级联技术的含风电互联电网机组组合策略

针对含风电互联电网日前安全约束机组组合的规模大、约束复杂、求解困难等问题,提出基于目标级联分析技术的分散协调优化策略。将问题分解为负责区域间边界节点电压相角协调的上层优化问题和以并行方式独立优化各区域发电计划的下层优化问题。下层优化以弃风电量期望和电量不足期望,量化各区域内风电、负荷预测误差,以及常规机组强迫停运等系统运行不确定性所带来的风险,并以罚函数的形式引入目标函数,以综合优化系统可靠性与经济性。2区域12节点系统和IEEE RTS96三区域互联系统算例仿真验证所建模型和算法的有效性。     

Mechanical and thermal properties and microstructural evolution of Ta-doped Nb4AlC3

(Nb_1-xTa_x)₄AlC₃ (x = 0–0.5) ceramics were prepared by the hot press sintering method. The XRD results show that the second phase (Nb_1-xTa_x)C is formed when the Ta content increases to 25 mol%. The SEM micrographs show that (Nb_1-xTa_x)C has a core/rim structure, whose formation mechanism was also investigated. Substituting some Ta for Nb can significantly improve the mechanical properties of Nb₄AlC₃. (Nb_0.75Ta_0.25)₄AlC₃ exhibits an excellent fracture toughness of 8.3 ± 0.3 MPa m^1/2 at room temperature (RT). The highest Young's modulus (349 ± 16 GPa) and Vickers hardness (4.5 ± 0.3 GPa) at RT are exhibited by the (Nb_0.5Ta_0.5)₄AlC₃ sample, which correlate to increases of 18% and 80%, respectively, compared with those of Nb₄AlC₃. The flexural strengths of (Nb_0.5Ta_0.5)₄AlC₃ are 439 ± 18 MPa at RT and 344 ± 22 MPa at 1100 °C, which correlate to increases of 27% and 45%, respectively, compared with those of Nb₄AlC₃. The solid solution of Ta and the formation of (Nb_1-xTa_x)C are beneficial to the strengthening of Nb₄AlC₃. The coefficient of thermal expansion (CTE) increases slightly from 7.08 × 10⁻⁶ K⁻¹ for Nb₄AlC₃ to 7.24 × 10⁻⁶ K⁻¹ for (Nb_0.75Ta_0.25)₄AlC₃ at 25–1400 °C. The thermal conductivity of (Nb_0.75Ta_0.25)₄AlC₃ (28.4–29.8 W/m·K) is higher than that of Nb₄AlC₃ (18.1–21.2 W/m·K) over the whole test range (25–1000 °C). Owing to their excellent mechanical and thermal properties, Ta-doped Nb₄AlC₃ ceramics have good potential as structural materials.     

Global weak solutions to a spatio-temporal fractional Landau–Lifshitz–Bloch equation

The present paper deals with global existence of weak solutions of a time-space fractional Landau–Lifshitz–Bloch equation involving the weak Caputo derivative and a fractional Laplacian. We use Faedo–Galerkin method with some commutator estimates in order to prove global existence of weak solutions for the model. The uniqueness is also discussed in a special one dimensional case.